Gearbox & Kickstart
BGM gearbox shim: 1.9mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.0mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.1mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.2mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.3mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.4mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.5mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM gearbox shim: 2.6mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
BGM rear hub bearing Lambretta
Rear hub bearing from BGM. Fit for all Lambretta Series 1-3, DL/GP and Indian/Spanish variants...
$40.00
Casa Performance close ratio gearbox
An all new close ratio gearbox designed for all Series 1-3, DL/GP, and Spanish Lambrettas. These rat..
$400.00
Casa Performance gear box end plate: Series 1-3
All new ultra high quality gear box end plates from Casa Performance. Originally developed for the C..
$120.00
Casa Performance gear selector fork pads set
This is a pair of Casa Performance pawls for operating the gearbox selector wishbone.Made in special..
$12.00
Casa Performance kick start piston gear pin
This peg screws into the side of your kickstart piston and is engaged by the mechanism that pushes..
$5.00
Casa Performance kick start piston gear pin, large o.d.
This peg screws into the side of your kickstart piston and is engaged by the mechanism that pushes..
$5.00
Circlip: end plate bearing and disc brake lever assembly
42mm circlip secures the roller bearing to the gearbox end plate. This circlip is also suitable fo..
$1.00
Crankshaft / Layshaft spacer shim: 0.5mm
This is a special crank shim made by MB Developments to fit on the crankshaft between the crank an..
$4.00
Crankshaft / Layshaft spacer shim: 1.0mm
This is a special crank shim made by MB Developments to fit on the crankshaft between the crank an..
$4.00
Domed 6mm allen bolt
This fastener is used to secure the wishbone to the gear change arm. The original spec calls for a s..
$0.45
Gear box end plate stud
This stud is used to secure the gearbox end plate to the main engine casing. You need 6 per engine. ..
$3.00