Search
Products meeting the search criteria
12mm external circlip
12mm external circlip, used on Lambretta brake pivots, clutch arms and rear brake pedals...
$0.45
12mm half nut: zinc
12mm half nut: ZincUsed on some fork link bolt, like the new Casa fork link kits. M12X 1.25..
$0.45
12mm shim: 1mm thick
12mm shim: 1mm thick, used on the gear arm, clutch arm (2x) and rear brake pedal...
$1.50
175cc conversion piston kit: 62.2mm
Complete piston assembly kit for any 175cc conversion cylindered Lambretta (Innocenti, Serveta, SIL)..
$65.00
BGM air hose with air filter, 42mm diameter for Dellorto PHBH carbs Lambretta
Remote air filter system based on the bgm PRO intake hose and a Marchald foam air filter.bgm PRO int..
$48.00
BGM air hose, 42mm diameter for Dellorto PHBH carbs Lambretta
In comparison with the standard intake hose, the bgm PRO air intake hose has a higher volume on the ..
$22.00
BGM gearbox shim: 2.2mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
Casa Performance tool for inserting 12mm wire type piston clips
Casa Performance tool for inserting 12mm 'C' shaped piston circlipsWill NOT fit tapered wrist pins!!..
$28.00
Circlip: end plate bearing and disc brake lever assembly
42mm circlip secures the roller bearing to the gearbox end plate. This circlip is also suitable fo..
$1.00
Clutch shim: 1.2mm
These shims sit behind the clutch sprocket and are used to adjust the alignment of the sprocket in r..
$3.00
Clutch steel plate: 1.2mm
These are non-standard 1.2mm clutch steel plates remade by MBD. High quality and precision made to..
$5.00
Clutch top plate: 2.0mm
Non standard 2mm clutch top plate designed to help the ever increasing 5 and 6 plate internal clut..
$12.00
Cylinder base packing plate, small block: 125-200cc 1.2mm
A high quality, laser cut aluminum packing plate for 150cc type casings. It is 1.2mm thick. Ideal fo..
$15.00
Cylinder base packing plate, small block: 125-200cc 2.0mm
A high quality, laser cut aluminium packing plate for 150cc type casings. It is 2mm thick. Ideal for..
$15.00
D/LD MK1 125cc piston kit: 52mm and oversized (14mm pin)
Piston -LAMBRETTA- Lambretta model A, B, C, LC, LD 125 (series 1), D 125 (series 1), E, F (14mm) - 5..
$65.00
D/LD MK2-3 125cc piston kit: 52mm and oversized (16mm pin)
D/LD MK2-3 125cc piston kit: 52mm and oversized (16mm pin)..
$65.00
Head gasket BGM 195cc: 1.2mm
This is a head gasket for the BGM MRB Racetour 195cc cylinder kit. It features eight mounting holes,..
$9.00
Head gasket BGM 225cc: 1.2mm
This is a head gasket for the BGM MRB Racetour 225cc cylinder kit. It features eight mounting holes,..
$9.00
LI 125cc Series 1 piston kit: 52.2mm
Complete piston assembly kit for any 125cc Lambretta series 1. Includes piston, piston rings, piston..
$65.00