Search
Products meeting the search criteria
3.5mm allen key
This is the unusually sized 3.5mm allen key you need for most original gear and clutch cable trunn..
$3.75
5mm e-clip: black oxide
This 5mm e-clip is used to secure the tie bar to the standard gear selector shaft. If you are usin..
$0.45
5mm split lock washer: Zinc
5mm split lock washer: Zinc Used on flywheel and cylinder covers..
$0.45
6mm shim: .5mm thick
This .5mm thick shim goes where the tie bar connects to the gear selector arm that goes into the eng..
$0.45
9mm shim for cable pulleys: .5mm thick
Goes on the control rod between the roller and olive. This one measures .5mm thick...
$1.25
BGM air hose with air filter, 45mm diameter for Dellorto SH2 carbs Lambretta
Remote air filter system based on the bgm PRO intake hose and a Marchald foam air filter.bgm PRO int..
$48.00
BGM air hose, 45mm diameter for Mikuni/Jetex carbs Lambretta
In comparison with the standard intake hose, the bgm PRO air intake hose has a higher volume on the ..
$22.00
BGM Crankshaft: 58 x 115mm
When good things get even better, the bgm PRO Lambretta crankshafts are now the bgm PROCompetition c..
$325.00
BGM Crankshaft: 60 x 115mm
When good things get even better, the bgm PRO Lambretta crankshafts are now the bgm PROCompetition c..
$325.00
BGM Dellorto 5mm main jet set, idle jets: 40-58
Set of 10 5mm jets for Dellorto carburetors. These can be used as an idle jet on PH/VH series carb..
$20.00
BGM Dellorto 5mm main jet set: 125-147
Set of 10 5mm jets for Dellorto carburetors. These can be used as an idle jet on PH/VH series carb o..
$20.00
BGM gearbox shim: 1.5mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50