Search
Products meeting the search criteria
7mm flat washer: Zinc
This fastener can specifically be used on Lambretta exhaust and inlet manifolds and Vespa engine c..
$0.45
7mm nut with nylon insert, Zinc
This fastener can specifically be used on the Lambretta inlet studs, on the bolts that hold on the..
$0.45
7mm nut: Zinc
This fastener can specifically be used on the Lambretta inlet studs, on the bolts that hold on the..
$0.40
7mm rear hub lock washer bolt: Zinc
This 7mm fastener can specifically be used for securing the rear hub nut lock washer to an Italian o..
$3.00
7mm split lock washer: Zinc
7mm split lock washer. Zinc plated. Can be used in several places but is primarily used to secure th..
$0.45
BGM Crankshaft: 58 x 107mm
When good things get even better, the bgm PRO Lambretta crankshafts are now the bgm PRO Competiti..
$325.00
BGM Crankshaft: 60 x 107mm
When good things get even better, the bgm PRO Lambretta crankshafts are now the bgm PROCompetition c..
$325.00
BGM gearbox shim: 1.7mm
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
Crankshaft: DL/GP taper 60 x 107mm
Our standard crankshafts are economically priced replacements for worn out or tired cranks. This is ..
$200.00
Cylinder base packing plate, large block: 200-250cc 0.7mm
200 cylinder packing plate / cylinder base gasket. Made from stronger alloy and designed by Mark Bro..
$9.00
Cylinder base packing plate, small block: 125-200cc 0.7mm
Small block cylinder packing plate / cylinder base gasket. Made from stronger alloy and designed by ..
$9.00
D/LD MK2-3 150cc piston kit: 57mm and oversized (14mm pin)
D/LD MK2-3 150cc piston kit: 57mm and oversized (14mm pin)..
$65.00
D/LD MK2-3 150cc piston kit: 57mm and oversized (16mm pin)
D/LD MK2-3 150cc piston kit: 57mm and oversized (16mm pin)..
$65.00
Exhaust clamp: 43-47mm, stainless
It is common for Clubman exhausts to leak at the joint between the U bend and the main exhaust body...
$8.00
Exhaust nut: 7mm, Brass
This special nut is suitable for use on the studs that secure a Lambretta exhaust...
$2.00
Exhaust port stud, standard
This 7mm x 31mm stud is designed for use with cylinders with standard oval external exhaust ports ..
$3.00
Head gasket BGM 195cc: 0.7mm
This is a head gasket for the BGM MRB Racetour 195cc cylinder kit. It features eight mounting holes,..
$9.00
Head gasket BGM 225cc: 0.7mm
This is a head gasket for the BGM MRB Racetour 225cc cylinder kit. It features eight mounting holes,..
$9.00