BGM Racetour intake manifold: 28-30mm carbs

bgm PRO inlet manifold specially designed for the MBgm RT / RaceTour kits. But can be used on all other piston ported 195-225cc Lambretta cylinders as well. The CAD designed manifold is CNC machined from billet and is designed to bring the carb as close to the original carb position as possible. It is designed to give the maximum clearance to the panel to make it perfectly work with the bgm airbox (BGM4488). This manifold uses the MB Scooters flange type rubber and there are two connection sizes available, one for 28-30mm and one for 24-25mm rubber mounted carbs.

The shape to the inlet port is matched to the barrel so there is no matching necessary. This is an excellent choice for carbs like:

• Keihin PWK 28
• Dellorto PHBH 28
• Dellorto PHBH 30
• Dellorto VHST
• Mikuni TM30

All hardware is included with delivery. We recommend the use of a slight smear of silicone instant gasket instead of the paper gasket. To fit the manifold the engine bolt needs to be removed to make fitting possible.