MB Crankshaft flywheel side bearing inner sleeve drift Lambretta

Crankshaft flywheel side bearing inner sleeve drift. This tool is designed to safely and easily fit the inner bearing sleeve from a flywheel bearing to the crank. You just fit the sleeve then tap it into place with this drift and a hammer.

It is best to hold the crank in your hand rather than stick it in a vice as you could put the crank out of line by hitting it with a hammer. We do not recommend heating up the inner sleeve as it can affect the hardening of the metal and make the bearing wear out very quickly. Use a little smear of loctite on the crank and bearing when fitting.