Search

BGM engine oil seal set: Lambretta Series 2-3, DL/GP, Serveta Viton

This handy kit contains the drive side oil seal, the two magneto housing oil seals, the kick start s..

$40.00

BGM high flow air filter: late series 2, 3, DL/GP, early Serveta

The bgm PRO Lambretta air filter is the ultimate replacement for all standardish Lambretta paper fil..

$28.00

Cylinder stud: Series 2-3, DL/GP Serveta

Standard single cylinder stud for all Lambretta Series 2-3, DL/GP and Serveta models. You need four ..

$7.00

Engine oil seal set: Lambretta Series 2-3, DL/GP, Serveta

This handy kit contains the drive side oil seal, the two magneto housing oil seals, the kick start s..

$30.00

Fuel tank: Series 2-3, DL/GP, Serveta

Nice reproduction fuel tank for all Series 2-3 and DL/GP Lambrettas and Serveta..

$75.00

Headset top hardware kit: Series 2-3

Hardware kit for securing the headset top to the headset bottom. Kit consisting of: 2 m5 x 45s..

$2.00

Horn bracket stirrup: Series 2-3, DL/GP

Used to hold the horn to the frame on Series 2 after 1961, all Series 3 and DL/GP Lambrettas. Made i..

$5.00

Kick start lever rubber: Series 2-3, GP/DL, Serveta. Black

High quality Italian kickstart rubber. Fits all Series 2-3 and GP/DL models. Series 1 and some ear..

$8.00

Kick start lever rubber: Series 2-3, GP/DL, Serveta. grey

High quality Italian kick start rubber in grey. Fits all Series 2-3 and GP/DL models. Series 1 and s..

$8.00

Plastic tail light lens gasket: Series 2-3

This plastic gasket goes between the tail light lens and tail light housing. They fit all Series 2-3..

$6.50

Plastic tail light lens gasket: Series 2-3 red

This plastic gasket goes between the tail light lens and tail light housing. They fit all Series 2-3..

$6.50

Rear brake pedal return spring: Series 2-3, DL/GP, Serveta

Rear brake pedal spring for all Series 2-3 and DL/GP Lambretta...

$12.00

Rubber air filter box elbow oval gasket: Series 2-3, DL/GP, early Serveta

Black rubber gasket that fits between the air box and metal elbow. Fits all Lambretta from early 196..

$5.00

Rubber air filter box gasket: Series 2-3, DL/GP, early Serveta

FIts between the top of the air box neck and the frame on all late Series 2 and all Series 3, DL/GP...

$3.00

Running in sticker for Series 2-3 TV 175/200, SX 200 in Italian

Running in sticker for Series 2-3 TV 175/200, SX 200 in Italian..

$4.00

SIP Premium crankshaft: TV175 series 2-3 small taper, 58 x 116mm

A high-end crankshaft for Lambretta engines equipped with a LI/TV/SX/S/Serveta ignition.In combinati..

$200.00

Tail light lens: Series 2-3 (Aprilia)

This is the Aprilia type rear lens. There are three different types of rear light units on Series 3 ..

$18.00

Tail light lens: Series 2-3 (CEV)

This is the CEV type rear lens. There are three different types of rear light units on Series 3 Lamb..

$18.00

Tail light reflector: Series 2-3

This tail light reflector fits all Series 2-3 Lambretta built after 1960 with either CEV or Aprilia ..

$28.00

Products meeting the search criteria