Search
Products meeting the search criteria
BGM cylinder stud set, with nuts and washers
This is a set of 4 thick cylinder head washers, three cylinder head nuts and one extended cylinder h..
$25.00
BGM stainless wheel rim stud
Replacement bolt for BGM PRO stainless steel rims.Has a square as an anti-twist protection.Tightenin..
$4.00
BGM stud installation kit
This handy tool kit from BGM allows damage-free installations and removal of various case studs in M..
$25.00
Casa Performance cylinder stud set
Set of 4 x special cylinder barrel studs with recessed, flat sides for fitment. These studs are..
$25.00
Casa Performance cylinder stud set, J range
Set of 4 x cylinder studs Lambretta Cento + J125 + Starstream + CP One35. These are manufactured by ..
$21.00
Crankcase side cover exhaust stud
This stud is used to hold the exhaust bracket to the main engine casing. You need two per engine cas..
$2.00
Crankcase side cover stud
This stud is the normal length crankcase side stud of which you need 14 for most crankcases...
$2.00
Crankcase side cover stud, extra long for exhaust tailpipe
RLC has had all the main studs remade for Lambretta engines, to our exact requirements. This is..
$2.25
Cylinder stud: A through F, D/LD MK 1
Standard cylinder stud for Lambretta models A through F and D/LD MK 1. M6 x 139mm threaded 15mm at e..
$7.00
Cylinder stud: D/LD MK 2-3
Standard cylinder stud for Lambretta models D and LD MK 2-3. M7 x 144mm threaded 17mm at each end. Y..
$7.00
Cylinder stud: Series 2-3, DL/GP Serveta
Standard single cylinder stud for all Lambretta Series 2-3, DL/GP and Serveta models. You need four ..
$7.00
Exhaust port stud, standard
This 7mm x 31mm stud is designed for use with cylinders with standard oval external exhaust ports ..
$3.00
Fork link damper stud: Zinc, oversized
This is a remade disc link damper stud, in steel and Zinc plated. It is suitable for Italian type di..
$4.00
Fork link damper stud: Zinc, standard size
This is a remade disc link damper stud, in steel and Zinc plated. It is suitable for Italian type di..
$4.00
Gear box end plate stud
This stud is used to secure the gearbox end plate to the main engine casing. You need 6 per engine. ..
$3.00
Hub stud: screw in type
This hard to find stud is as fitted to original Lambretta hubs. It has the normal thread for the n..
$4.00
Hub stud: screw in type, extra long for Octopus hub
This hard to find stud is as fitted to original Lambretta hubs. It has the normal thread for the n..
$6.00
Hub stud: screw in type, Series 1 TV175
This hard to find stud is as fitted to original Lambretta hubs. It has the normal thread for the nut..
$4.00
